Operating The Handset; Activating/Deactivating The Handset; Operating The Touchscreen; Handset Idle Display - Gigaset SL910H Instruction Manual

Operating the handset

Activating/deactivating the handset

¤
Press and hold the end call key
mation tone.
¤
Press and hold the end call key

Operating the touchscreen

The Gigaset SL910H handset is primarily operated using the display and only to a small extent using
the three buttons on the handset.
Icons, list entries, buttons and sliders shown on the display are sensitive areas. You can set up and
activate functions, enter or dial phone numbers and navigate between the various display screens
(pages) by touching these areas and dragging them across the display.
Selecting functions/list entries
To activate a function or select a list item (directory, submenu, call list), simply tap your finger on the
corresponding icon or on the required list entry on the display.
Activating/deactivating functions
Functions, e.g., room monitor, are activated and deactivated via buttons.
If the button slider is to the right, the function is acti-
vated. The area to the left of the slider is highlighted
(on).
If the button slider is to the left, the function is deacti-
vated (off). The area to the right of the slider is black.
There are two ways to operate a button:
¤
Slowly drag the slider to the right or left to activate
or deactivate the function.
¤
Touch the area to the right or left of the slider
briefly and the slider moves to the right or left to
the area that has been touched.

Handset idle display

The idle display consists of three pages that are shown separately on the display.
u The configurable page (example
You can customise this page yourself. More detailed information on configuring this page is avail-
able on page 32.
¢
By default, the date and time are displayed and quick access can be set for call lists and the direc-
tory ( page 10).
u The dial page (example
You will need this page to make calls. The dial page contains a keypad (numerical keyboard) for
entering phone numbers. You can use the options on this page to make internal calls and to dial
numbers from the directory and the call lists.
u The message page (example
You can use this page to go straight to the message lists for the phone (dependent on base): call
lists, answering machine list, SMS inbox and network mailbox. An icon and the number of new
and old messages are displayed for each list that contains entries. Touch the icon to open the cor-
responding list.
The default configuration, i.e., after the handset is switched on for the first time, is to display the
configurable page.
a
in idle status to deactivate the handset. You will hear a confir-
a
again to reactivate the handset.
¢
page 10)
¢
page 3)
¢
page 21)
Operating the handset
Function Function
activated deactivated
on
Slider Slider
on off
11