Configuring The Handset; Quick Access To Functions, Quickdial - Customising Your Own Idle Display Page - Gigaset SL910H Instruction Manual

Configuring the handset

Configuring the handset
Your handset comes with default settings, but you can change the settings to suit your individual
requirements.
Quick access to functions, QuickDial – customising your own idle display
page
On the configurable page of the idle display (
applications, functions and phone numbers for quick access.
¤ Starting the configuration process
While in idle status, open the configurable page (
Idle status
Ð
<
Configuration mode
Ù
Alarm
¤
Press and hold (approx. 2 seconds) any position on the configurable area on the display.
¢
A selection bar with functions is displayed in the header, and you can drag it onto the configurable
page ( page 32). You can move the selection bar horizontally (Scrolling horizontally,
to display further selection options.
Completing the configuration process ¤
Either press and hold any position on the configurable area of the display, or briefly press
The settings are saved.
Adding application/function
In configuration mode:
¤
Drag the function/application using drag&drop from the selection list into the configurable area.
With the exception of QuickDial, you can only drag the functions to the configurable area once.
You can collate a maximum of 18 functions, applications or QuickDial shortcuts on the configurable
page. You can only use the functions/applications after exiting configuration mode.
Removing application/function
In configuration mode:
¤
Drag the corresponding icon back into the selection list.
A QuickDial is deleted. The related entry in the directory remains unchanged.
The settings for all other functions (e.g., wake-up time) remain unchanged.
32
¼ V
06:00
INT 1
Ä Å Ä
l ¾
QuickDial Write Message
¢
page 11, example
¢
page 13).
Status bar
Navigation area
>
Configurable area
Selection bar
¢
page 10), you can customise
¢
page 15)
a
.