Section 3
Configuring Time Settings
The Time screen enables you to configure time settings.
To access the screen, click Control Panel > Time.
Field
Description
Displays the current time.
Current Time
Time Zone
Select your local time zone. The default is EST.
Auto Daylight
If you want to automatically adjust for Daylight Savings Time, check to
Adjust
enable this feature. The default is enabled.
NTP Time
If you want to automatically check the current time, check to enable
Synchronization
this feature. The default is enabled.
NTP Server
Enter the current Network Time Protocol (NTP) servers from which
1, 2, 3
you can choose to synchronize your device. A listing of public NTP
servers, their access policies, and their Service Areas can be found
through the following URL: http://www.ntp.org.
To change, enter the host name or IP address for a desired Time
Server.
Apply
Click to save your settings.
Click to cancel any changes.
Cancel
3-40
Configuration
WR850