Motorola WR850 User Manual page 67

Configuration
To access the screen, click Networking > Routing.
Field
RIP V1
RIP V2
Routing Table
Entry List
WR850
Description
Enables or disables RIPv1.
The default is disabled.
Enables or disables RIPv2.
The default is disabled.
To add a Routing Entry:
1 Select a Destination IP number, (the client's Routing IP address).
2 Enter Subnet Mask and Gateway IP address.
3 Select the Interface (LAN & Wireless or Internet (WAN)) to which
the entry will apply.
4 Enter the Metric (or how many hops the routing can take).
5 Click Add to enter the Routing Entry into the Routing Table.
6 Click Apply to save the entry.
To edit or remove an entry, click the desired entry and perform
the requested action.
Section 3
3-29