Static Ip; Pptp - Motorola WR850 User Manual

Installation

Static IP

If you are required to use a permanent IP address for connecting to the Internet, then select
Static Assigned. Your ISP informs you if this is the connection to use.
1 From Connection Mode, select Static Assigned.
2 In the IP address field, enter the IP address supplied by your ISP.
3 In the Subnet Mask field, enter the Subnet Mask supplied by your ISP.
4 In the Default Gateway field, enter the values supplied by your ISP.
5 In the Primary DNS field, enter the values supplied by your ISP. If necessary, enter
secondary or tertiary DNS values into the Secondary or Tertiary DNS fields.
6 Click Apply to save the setting. If you wish to start over, click Clear.

PPTP

Point to Point Tunneling Protocol (PPTP) is a service commonly found in Europe.
1 From Connection Mode, select PPTP.
2 In the PPP User Name field, enter the PPP User Name supplied by your ISP.
3 In the PPP Password field, enter the PPP Password supplied by your ISP.
4 In the PPTP Client IP field, enter the PPTP Client IP address supplied by your ISP.
5 In the PPTP Server IP field, enter the PPTP Server IP address supplied by your ISP.
6 Click Apply to save the setting. If you wish to start over, click Clear.
WR850
Section 2
2-21