Training Mode (Entry); Training Mode (Next (Softkey 1)Key: Select Item); Training Mode (Func(Softkey2) Key: Change Each Item Setting); Training Mode (0 Key: No Function) - Uniden DTL-8R-1 User Operation And Specification

3.4.7 Training mode (entry)

Press * and # at the same time then press talk key. The Handset emits confirmation tone
and enters to training mode. This message is shown on the LCD and F1 LED is blinking.

3.4.8 Training mode (Next (Softkey 1)key: select item)

3.4.9 Training mode (Func(Softkey2) key: change each item setting)

3.4.10 Training mode (0 key: no function)

When 0 button is pressed during training mode, key touch tone will be emitted but any
function doesn't work in case of the NEC PBX.
To select item, press Next key
Item changes as followings.
F1àF1(TALK)àF2àF2(TALK)àF3àF3(TALK)àF4à
àF4(TALK)àF5àF5(TALK)àF6àF6(TALK)àF7à
àF7(TALK)àF8àF8(TALK)àOFF HOOK RINGàF1...
To change item setting, press Func key
Item setting changes as followings.
LK01àLK02àLK03àLK04àLK05àLK06àLK07àLK08à
àLK09àLK10àLK11àLK12àLK13àLK14àLK15àLK16à
àLNR/SPDàRecallàFNCàANSàLK01...
33