Wireless Link Encryption Faq; Encryption Data Entry Fields Are Not Available; Link Fails To Bridge Packets After Enabling Link Encryption; Figure 136 - Configuration Reboot Screen - Motorola MotoWI4 PTP 600 Series User Manual

6. Reboot both ends of the link Figure 136. The software is designed to allow five seconds
so that a user can command both ends of the link to reboot before the wireless link drops.

16.2 Wireless Link Encryption FAQ

16.2.1 Encryption data entry fields are not available

Check that the correct license key has been inserted into the unit. The current license key is
displayed on the 'License Key' data entry page.

16.2.2 Link fails to bridge packets after enabling link encryption

If the wireless link status on the status web page indicates that the link is 'Searching', and you
can browse to the local end of the link but not to the remote end, then check that the same
encryption algorithm and key have been entered at both ends of the link. Failure to enter the
same algorithm and key will result in received packets not being decrypted correctly.

Figure 136 - Configuration Reboot Screen

214