Table 10 - 600 Series Bridge Factory Configuration Values - Motorola MotoWI4 PTP 600 Series User Manual

Example PTP 600 Series Configuration Data
For your convenience these two units have been pre-configured as a link
Units:
ODU serial number
016780000FFF
Ethernet MAC address
00:04:56:80:0F:FF
Configured as:
Master
Target MAC address
00:04:56:80:0F:C7
License Key
A471-FE88-428D-E1F3
IP Address
169.254.1.2
Table 10 – 600 Series Bridge Factory Configuration Values
The factory default configuration is limited in range to 40 Km (25 miles). If you wish to install a
wireless link with a range of > 40 Km (> 25 miles) and < 200 Km (< 124 miles) or < 5 Km (< 3
miles) you must follow the 'Manually Configuring The Wireless Units' in section 8.3.4.1.
The factory default configuration is set to Region 1. Region 1 allows the 600 Series bridge a
maximum transmit power of 25 dBm. If the local regulatory regime limits the maximum
transmit power (EIRP) to less than 25 dBm you should obtain a new license key containing
the correct region code from your local distributor or direct from Motorola. Alternatively in the
short term, you should reduce the maximum transmit power by following the procedures in
'Manually Configuring The Wireless Units' in section 8.3.4.1.
ODU serial number
016780000FC7
Ethernet MAC address
00:04:56:80:0F:C7
Slave
Target MAC address
00:04:56:80:0F:FF
License Key
534F-4F54-D1B0-E2DA
IP Address
169.254.1.1
100