Stop The Snowthrower - Craftsman C950-52122-0 Owner's Manual

8. To stop the auger, release the auger drive clutch lever (A).
9. To move the snowthrower backwards, move the speed select lever
(D, Figure 2) into reverse (R), and engage the traction drive clutch lever
(B, Figure 4).

STOP THE SNOWTHROWER

1. Release the traction drive clutch lever (B, Figure 4).
2. Remove the safety key (A Figure 11). Keep the safety key out of the
reach of children.
WARNING: Never run engine indoors or in an enclosed,
poor ventilated area. Engine exhaust contains CARBON
MONOXIDE, an ODORLESS and DEADLY GAS.
• Keep hands, feet, hair, and loose clothing away from
any moving parts on engine and snowthrower.
• Temperature of muffler and nearby areas can exceed
150°F (66°C). Avoid these areas.
• DO NOT allow children or young teenagers to operate or
be near snowthrower while it is operating.
WARNING: Read Operator's Manual before operating
machine. This machine can be dangerous if used
carelessly.
• Never operate the snowthrower without all guards,covers,
shields in place.
• Never direct discharge towards windows or allow
bystanders near machine while engine is running.
• Stop the engine whenever leaving the operating
position.
• Disconnect spark plug before unclogging the impeller
housing or the discharge chute and before making
repairs or adjustments.
• When leaving the machine, remove the safety key. To
reduce the risk of fire, keep the machine clean and free
from spilled gas, oil, and debris.
13
OPERATION