Adjust Skid Shoes - Craftsman C950-52122-0 Owner's Manual

Assemble Speed Select Lever
1. Insert speed control rod up through shift plate (P). Place lower
rod end on top of shift yoke (Q).
2. Install bolts and locknuts (Q). Tighten fasteners securely.
3. Install grip onto speed control rod (R).
P
Q
8 lb-ft
(11 Nm)
4
3/8" 7/16"
1/4" x 3/4"
R

Adjust Skid Shoes

1. Adjust the skid shoes so that the scraper bar has 1/8" - 3/16"
clearance above a hard surface or 1" clearance above a
gravel surface (S).
7/16"
S
1/8" - 3/16"
(3 mm - 5 mm)
1"
(2,5 cm)