Arctic Cat 450 Service Manual page 68

5. Install the key in the crank balancer shaft; then
install the gear and aligning the timing marks,
slide the gear into place.
6. Align the shift cam fork slots with the shift fork
shaft locating boss and with a washer on each end,
install in the crankcase.
7. Place the shift forks into position on the assembled
countershaft and install into the crankshaft as an
assembly.
MD1024
FI658
FI652A
Manual
Table of Contents
8. Align the shift forks to allow engagement with the
shift cam; then engage the shift forks and slide the
shift fork shaft into the locating boss in the crankcase.
9. Install the input driveshaft.
Section
Table of Contents
FI662
3
FI653
FI653A
FI655A
3-45