Arctic Cat 450 Service Manual page 119

11. Install the intake manifolds and tighten to 8 ft-lb;
then install the throttle body and secure with the hose
clamps.
3-96
GZ099A
GZ372
GZ106
GZ107
Manual
Table of Contents
12. Connect the fuel injector, TPS connector (A), MAP
sensor connector (B), and ISC valve connector (C).
13. Install the shift linkage with bushings and secure
with E-clips.
14. Connect the gasline hose connectors to the fuel rails;
then install any nylon ties that were removed during
disassembly.
15. Install the air filter housing and secure to the throttle
body with a hose clamp; then connect the IAT sensor
connector.
Section
Table of Contents
GZ090B
GZ094A
GZ124