Reverse The Door Swing - Thetford N614E.3F Installation Manual

- Install the upper trim piece [40] over the control panel:
- Align the four (4) metal mounting clips on the back of the upper trim piece with
the four (4) rectangular slots in the mounting bracket of the refrigerator.
- Push the upper trim piece firmly until all four (4) mounting clips engage the
rectangular slots with a "snap" sound.

Reverse the Door Swing

This refrigerator has cabinet hinges that allow you to change the direction the door opens by moving the hinges on a diagonal to the
opposite side.
1. Remove the doors (See Art02269):
- Remove the storage bins from the doors.
NOTICE
Do not mix the upper and lower hinge pins because they are different.
- Remove and save the upper hinge pin [63] from each door.
- Pull the door latch and remove each door from the refrigerator.
- Remove and save the lower hinge pin [64] from each hinge.
- Remove the washer [254] and the RH lower hinge support [255] from the lower door.
2. Change the position of the cabinet hinges, strike plate and controls. (See Art02443):
- Remove and save the screws from the strike plate [65a].
Art02269
Installation / Owner's Manual 10
63
66
255
254
64
67
67b
65a
66b
67b
66b
Art02443
40
Art02442
66a
67a
66a
65b
67a