Changing The Sim Pin - Motorola iM1100 User Manual

To enable the SIM PIN requirement:
1. Right-click on the iM1100 Wireless Modem icon on your taskbar
(see page 26) and choose Properties.
2. The Motorola iM1100 Modem window opens. To enable the SIM
PIN requirement, check Enable SIM Card.
3. Enter your SIM PIN and click OK. If you have not changed the SIM
PIN, the default SIM PIN is 0000.

Changing the SIM PIN

To change your SIM PIN:
1. From your Start button, choose Programs > Motorola iM1100
Wireless Modem Applet > Configure program.
2. The Modem Configurations window opens.
3. Click User Settings.
4. Click on the SIM PIN Change tab.
5. Enter a new 4- to 8-digit SIM PIN in the New SIM PIN: field. Enter
it again in the Confirm New SIM PIN: field.
6. Click OK.
Unblocking the SIM PIN
If you forget your SIM PIN and unsuccessfully enter it three times, access to
your iM1100 Wireless Modem will be blocked.
Before you begin, obtain the SIM PIN Unblocking Key
(PUK) code from your service provider, then read and
understand the SIM PIN unblocking sequence.
If you unsuccessfully enter the PUK code ten times, the
SIM card is permanently blocked and must be replaced. If
this happens, all data will be lost. You will get a message to
contact your service provider.
38
N O T E