Disconnecting From The Internet; When You Are Connected - Motorola iM1100 User Manual

Disconnecting from the Internet

To disconnect your modem's connection:
1. If the iM1100 Packet Data Service window is not open, open it by
clicking on the iM1100 Wireless Modem icon on your taskbar, or
click the desktop icon.
2. Close the window, or do the following: Right-click in the iM1100
Packet Data Service window or choose Mode from the iM1100
Packet Data Service window's menu bar and then choose Disconnect
and Exit.
This disconnects your modem from the network and closes the status
window.

When You Are Connected

When your iM1100 Wireless Data Modem is connected to the network,
you are Packet Data Registered even if you are not actively transmitting
data.
Your PC displays a floppy disk icon, indicating that your
modem is ready to make packet data calls.
After you send data, the packet data transfers take place during times when
the iDEN network is not busy. You do not have simultaneous contact with
the addressee.
28