Consumables - Fujitsu scansnap s1300i Basic Operation Manual

Consumables

This section explains about the consumable part numbers, replacement cycles and how to replace
the consumables.
ARNI N G
ATTENTION
The bottom part of the ScanSnap may become hot when the ScanSnap is being used but this does not
affect ScanSnap operation or cause any physical harm. Be careful not to drop the ScanSnap when
carrying it.
l "Part Numbers and Replacement Cycle of Consumables" (page 102)
l "Checking the Status of Consumables" (page 103)
"Replacing Consumables" (page 104)
l
l Before replacing consumables, you must turn off the ScanSnap and unplug
the power connection cable (power cable or USB bus power cable) from the
power supply source (AC outlet or computer). Not doing so may cause fire
or electrical shock.
l Do not place internal parts such as the pad assy and the pick roller
assembly within reach of small children. Doing so may cause injury.
101
Consumables