Motorola VC5090 Product Reference Manual page 57

Tap the icon
2. SerialWedge
Select >
3. Configuration
Port Selection Window
Figure 2-43
Select the COM port radio button to match the COM port that you connected the scanner cable to.
4.
Tap .
5. OK
The scanner beeps to indicate that it is receiving power.
Tap the icon in the task tray.
6. SerialWedge
For serial connections, select
7.
window appears.
Parameters
Communications Parameters Window
Figure 2-44
Use the drop-down lists to select the parameter values to match the scanner. Refer to the scanner Product
8.
Reference Guide for more information.
Tap .
9. OK
Tap the icon in the task tray.
10. SerialWedge
Select >
11. Configuration
in the task tray.
from the pop-up menu. The
Port Selection
>
Configuration Port Configuration
from the pop-up menu. The
Barcode Settings
Installation 2 - 29
window appears.
Port Selection
from the pop-up menu. The
window appears.
Barcode Settings
Communication