Calibrating The Screen; Using The Display - Motorola VC5090 Product Reference Manual

3 - 18 VC5090 Vehicle Computer Product Reference Guide

Calibrating the Screen

Using the Display

CAUTION
This section describes how to calibrate the VC5090 touch screen. If the current calibration does not allow for easy
touch screen input or you want to recalibrate the screen at any time, refer to
To calibrate your VC5090:
Tap >
1. Settings
Stylus Properties - Calibration Tab Window
Figure 3-29
Tap the
2. Recalibrate
Calibration Screen
Figure 3-30
Do not use sharp objects when touching the screen. Use your finger tip or a stylus when touching the
screen.
> >
Control Panel Stylus
button. The calibration screen displays.
Carefully press and briefly hold stylus
on the center of the target.
Repeat as the target moves around
the screen.
Press the Esc key to cancel.
icon > tab.
Calibration
Using the Keyboard on page 3-19.