Answering System Capacity; Voice Prompts; New Message Indication - AT&T SynJ SB67108 User Manual

Answering system
Setting your system to automatically answer calls

Answering system capacity

The maximum recording time of all handsets and base is 180
minutes. The actual recording time depends on individual message
characteristics. Individual messages can be up to three minutes.
Messages remain available for review until you delete them.
Each recorded announcement requires system memory, so we
suggest recording a brief announcement in order to leave more
space for messages.
NOTE: You cannot record an announcement when the telephone system is out of
space. You will hear a two-beep alert tone and voice prompt "Memory is full."
Please refer to Remaining space in the SynJ SB67138/SB67158 telephone base
manual.

Voice prompts

The system provides voice prompts to guide you through the
setup procedures.

New message indication

When you have new messages in the handset
mailbox, the screen displays New messages.
In addition, the M.box softkey and the new message
indicator flash.
If the notify alert is turned on (pages 21-22), you will receive a phone
call at the telephone number you chose each time a new message
has been recorded.
There is no new message indication on the handset when messages
are left in the general mailbox.
59
1:Handset 1
New messages
12:00PM 12/31
M.box CID