Mute - AT&T SynJ SB67108 User Manual

Handset operation
Options while on calls
While recording a call:
The other party hears a short beep when the recording begins and
once each minute during the recording. To ensure compliance with
state and federal regulations regarding the recording of a telephone
call, you should start the recording process by informing the caller
that you are recording the call.
NOTE: Calls that you record use the same memory as the answering system. Recording
long conversations uses up space available for recording normal messages. Please see
Remaining space in the SynJ SB67138/SB67158 telephone base manual.
Play back a recorded call:
Play memos or two-way phone conversations the same way as
messages are played. See Message playback on page 60.

Mute

Use the mute function during a telephone conversation to silence the
microphone. You can hear the caller, but the caller does not hear you.
To mute a call:
• Press MUTE. When mute is on, the handset
screen flashes -MUTE.
To end mute a call:
Press MUTE again and resume speaking.
•
30
L1
Line1 00:01:15
-MUTE