Toyota 2008 4Runner Owner's Manual page 72

Hide thumbs Also See for 2008 4Runner:

Table of Contents

3. Stow the seat leg in the back of the

seat cushion. Take the holding strap

out of its holder, and attach the

strap to the assist grip. Tighten the

strap by pulling the end and fix it

with the hook−and−loop fastener.

When folding up the third seats, fix

the seats securely by adjusting the

length of the holding strap. Failure to

do so may cause an unexpected inju-

ry in the event of emergency braking

or collision.

4. Remove the seat anchor covers from

the back of the seat cushion, and

install them over the seat anchors.

Be sure to apply the covers on the

seat anchors, or you may get burned

when they become hot.

When returning the third seat to its origi-

nal position, stow the holding strap in the

holder in the direction shown above. Then

do the above procedures in the reverse

Show Quick Links

Chapters

Table of Contents