Automatic Door Locking And Unlocking Functions - Toyota 2008 4Runner Owner's Manual

07 12.25
—Automatic door locking and
unlocking functions
AUTOMATIC DOOR LOCKING
You can select the following functions:
Locking linked with the shift position
D
All doors are automatically locked when
the selector lever is moved out of "P"
position.
Locking linked with vehicle speed
D
All doors are automatically locked when
the vehicle speed goes above about 20
km/h (12 mph).
You can set or cancel the automatic
door locking functions:
Be sure to apply the parking brake when
performing the following operations.
To select the locking linked with the
shift position:
1. Close all doors and turn the engine
switch to the "ON" position.
2. Shift the selector lever to the "P" posi-
tion.
3. Within 10 seconds of turning the en-
gine switch to the "ON" position, press
and hold the driver's side power door
lock switch in the lock position for 5
seconds and then release.
The doors will be locked and unlocked
to indicate that the function is set.
To cancel the function, do the above op-
eration again.
To select the locking linked with the
vehicle speed:
1. Close all doors and turn the engine
switch to the "ON" position.
2. Shift the selector lever from "P" to the
"N" position.
3. Within 10 seconds of turning the en-
gine switch to the "ON" position, press
and hold the driver's side power door
lock switch in the lock position for 5
seconds and then release.
The doors will be locked and unlocked
to indicate that the function is set.
To cancel the function, do the above op-
eration again.
25