Toyota 2008 4Runner Owner's Manual page 210

Hide thumbs Also See for 2008 4Runner:
Table of Contents

Advertisement

07 12.25
z If your vehicle gets ditched, turn off
the rear height control air suspen-
sion with the "HEIGHT CONTROL
OFF" switch. Otherwise, the vehicle
height may change because of the
automatic leveling function resulting
in an unexpected accident.
CY16018
(e) Height control indicator lights
1. Height control indicator lights
2. Height control "OFF" indicator light
When the engine switch is turned on, all
the indicator lights come on. The indicator
light showing the present mode only re-
mains on and all other lights go off after
a few seconds. This means the system
operates correctly.
CY16019
If you change the vehicle height mode,
the indicator lights change as follows:
When changing the vehicle height from
the "N" mode to "HI":
1. The "N" mode indicator light goes off
and the "HI" mode indicator light blinks.
2. After the vehicle height control reaches
the "HI" mode, the "HI" mode indicator
light remains on.
If
the
underbody
of
the
vehicle
touched the surface on bumpy roads or
the area around the rear suspension is
coated with ice, the vehicle height cannot
be lowered with the height select switch.
The height control indicator lights change
as follows:
has
195

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 2008 4Runner and is the answer not in the manual?

Table of Contents

Save PDF