Toyota 2008 4Runner Owner's Manual page 251

07 12.25
MP3/WMA player
There are two scan features—you can ei-
ther scan the files in a folder on a specif-
ic disc or scan the first file of all the
folder.
Scanning the files on a folder:
Quickly push and release "SCAN". "SCAN"
will appear on the display and the player
will scan all the files in the folder you are
listening to. To select a file, push the
"SCAN" again. After all the tracks on the
disc have been scanned in one pass, nor-
mal play resumes.
Scanning the first file of all the folders:
Push "SCAN" until you hear a beep.
" " will appear on the display and
the player will scan the first file of the
next folder. To select a folder, push the
"SCAN" again. After all the folders have
been scanned in one pass, normal play
resumes.
236
SEEK/TRACK (Seeking/Tracking
down)
Radio
In the seek mode, the radio finds and
plays the next station up or down the
station band.
To seek the next station, quickly push and
release " " or " " side of the "SEEK/
TRACK" button. Do this again to find the
station after that.
∗
XM Satellite Radio —
r
To select the next channel within the cur-
rent channel category, push the " " or
" " side of the "SEEK/TRACK" button.
Repeat until a desired channel is found.
∗
: Use of satellite radio requires XM
tuner and service. Contact your Toyota
dealer for details.
Compact disc player
Use this button to skip up or down to a
different track.
Push " " or " " side of the "SEEK/
TRACK" button until the number of the
track you want to listen to appears on the
display. If you want to return to the begin-
ning of the current track, quickly push the
down side of the button one time.
up/ MP3/WMA player
To file up or down to a different file:
Push either side of the "TRACK" several
times until the file you want to listen to
appears on the display. If you want to
return to the beginning of the current file,
push the " " side of the button one time,
quickly.
Vehicles with rear seat entertainment sys-
tem—
While the DVD player is in operation, the
chapter or track can be changed by push-
ing the " " or " "
"SEEK·TRACK" button.
ST (Stereo reception) display
Your radio automatically changes to stereo
r
reception when a stereo broadcast is re-
ceived. "ST" appears on the display. If the
signal becomes weak, the radio reduces
the amount of channel separation to prev-
ent the weak signal from creating noise.
If the signal becomes extremely weak, the
radio switches from stereo to mono recep-
tion.
side of the