Toyota 2008 4Runner Owner's Manual page 203

07 12.25
At this time, the slip indicator light will
come on, the downhill assist control sys-
tem indicator light flash and the downhill
assist control system stops operating tem-
porarily in order to protect the brake ac-
tuator. (Although the downhill assist con-
trol system does not operate, it is no
problem to continue your driving.) The
system will be automatically restored after
a short time and the slip indicator light
and the downhill assist control system in-
dicator light go out.
188
CY16074
If there is any abnormality in the sys-
tem, the "VSC OFF" warning light will
flash. When the "DAC" switch
pushed, the downhill assist control sys-
tem indicator light also flash.
If the "VSC OFF" warning light flashes,
there may be an abnormality in any of the
following systems in addition to the down-
hill assist control system.
Hill−start assist control system
D
Active traction control system
D
Vehicle stability control system
D
"VSC OFF" warning light
When the system is normal and the en-
gine switch is turned to "ON", the warning
light will come on and will go off after a
few seconds.
It is not a malfunction that the warning
light may stay on for 60 seconds after the
engine switch is turned to the "ON" posi-
tion.
Depressing the brake pedal repeatedly
may turn on the light. It is normal if it
goes out after a few seconds.
If the warning light flashes while driving,
the system does not work. However, as
normal braking operates when being ap-
is
plied, it is no problem to continue your
driving.
In the following cases, contact your Toyota
dealer:
The warning light does not come on
D
after the engine switch is turned to
"ON".
The warning light remains on after the
D
engine switch is turned to "ON".
The warning light flashes while driving.
D