Lock Operation - Yale YRD210 Installation And Programming Instructions

Lock Operation

Change Default Master Code Before Programming*
1. Enter the 8-digit default Master PIN code (12345678) followed by the
2. Enter "1" followed by the
3. Enter new 4-8 digit Master PIN code followed by the
*Default Master PIN Code must be changed prior to programming the lock.
1
1
Enter current Master PIN code,
followed by the key.
PIN code structure
Maximum number of user codes is 250 with Network Module; without Network Module,
maximum is 25 user codes.
Set Up User Codes
User Codes can only be programmed through the Master Code.
1. Enter the 4-8 digit Master PIN code followed by the
2. Enter "2" followed by the
3. Enter the User number to be registered (1-25) followed by the
4. Enter a 4-8 digit PIN code for the User number followed by the
Note: When registering User codes, the code must be entered with in 20 seconds.
If time expires, no codes are registered and the process must be re-started.
Privacy Mode vs. All Code Lockout Mode
ƒ ƒ LockoutƒisƒaƒMenuƒfeatureƒthatƒrestrictsƒPinƒcodeƒaccessƒ(exceptƒMaster).
ƒ ƒ Privacyƒmodeƒisƒsetƒbyƒpressingƒandƒholdingƒtheƒbuttonƒ(foundƒbelowƒthumbƒturn)ƒforƒaƒ
durationƒofƒfourƒbeeps.ƒThisƒdeactivatesƒtheƒkeypadƒandƒsound,ƒandƒbecauseƒitƒisƒsetƒfromƒ
theƒinside,ƒprovidesƒaƒsecureƒandƒsilentƒlockƒforƒtheƒconvenienceƒofƒtheƒoccupant(s).ƒ
An ASSA ABLOY Group brand
key.
2
Enter '1' to change Master PIN code,
followed by the key.
key.
key.
key.
3
Enter the new Master PIN code (4~8
digits), followed by the
key.
key.
key.
P/N AYRD210-INST-FUL Rev B
key.
10