28L110U/32L110U Toshiba 28"/32" 720p 60Hz LED TV
Connecting a cable or satellite box
Many cable or satellite TV boxes have more than one connection type. To get the best video, you should use the best
connection type available. For more information, see
You can connect a cable or satellite box using:
• HDMI (best)
• DVI (same as HDMI but requires an audio connection)
• Component video (better)
• AV (composite video) (good)
• Coaxial (good)
HDMI (best)
On your TV
HDMI cable
connector
HDMI jack
1 Make sure that your TV's power cord is unplugged and all connected equipment is turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect an HDMI cable (not provided) to one of the HDMI IN jacks on the side of your TV and to the HDMI OUT jack
on the cable or satellite box.
4 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
5 Press INPUT to open the Input Selection list.
6 Press
or
to highlight HDMI 1 or HDMI 2, then press ENTER.
Note
An HDMI cable carries both audio and video. You do not need to use any
audio cables.
Cable or
satellite box
Cable wall
jack
www.tv.toshiba.com
What connection should I use?
HDMI cable
on page 18.
Side of TV
19