Dvi (Same As Hdmi But Requires An Audio Connection) - Toshiba 28L110U Instruction Manual

DVI (same as HDMI but requires an audio connection)

Notes
On your TV
HDMI cable
connector
HDMI IN 1
(DVI) jack
1 Make sure that your TV's power cord is unplugged and all connected equipment is turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect an HDMI-DVI adapter (not provided) to one end of an HDMI cable (not provided), then connect the adapter
to the DVI OUT jack on the cable or satellite box.
4 Connect the other end of the cable to the HDMI IN 1 (DVI) jack on the side of your TV.
5 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
6 Press INPUT to open the Input Selection list.
7 Press or to highlight HDMI 1, then press ENTER.
20
• You must use the HDMI IN 1 (DVI) jack to connect a cable box using
DVI.
• Your TV supports DVI video only. To add sound for a DVI connection,
connect external speakers or a sound bar to the cable or satellite box.
Cable or
satellite box
Cable
wall jack
HDMI cable with
HDMI-DVI adapter
www.tv.toshiba.com
Toshiba 28"/32" 720p 60Hz LED TV
Side of TV