Adjusting The Sound; Adjusting Sound Settings - Toshiba 28L110U Instruction Manual

28L110U/32L110U Toshiba 28"/32" 720p 60Hz LED TV

Adjusting the sound

This section covers:

• Adjusting sound settings

• Playing TV audio only
Adjusting sound settings
You can adjust sound settings to improve the sound
quality.
1 Press MENU, press
then press ENTER.
2 Highlight an option, then press ENTER. You can
select:
• Balance—Adjusts the balance between the left
and right audio channels.
• Bass—Adjusts the low sounds.
• Treble—Adjusts the high sounds.
• DTS TruSurround—Delivers clear, crisp, and
natural sound over front facing speaker
configurations, complete with rich bass, high
frequency detail, and clear dialog. You can select
On or Off.
• Sound Mode—Selects the sound mode. You
can select Standard, Music, Movie, or Clear
Voice.
• TV Speakers—Turns your TV's speakers on or
off.
• MTS—(Analog channels received through the
ANT/CABLE IN jack only) Selects the audio
mode. You can select:
• Stereo—Select this option for programs
broadcast in stereo. You can typically leave
your TV in Stereo mode because Stereo
outputs the type of sound being broadcast
(stereo or mono).
• Mono—Select this option if there is noise or
static on weak stereo broadcasts.
• SAP—Select this option to listen to a
secondary audio program, if available. If you
select this option and no secondary audio
program is available, you may not hear
sound. Change the MTS option to Stereo.
or to highlight Sound,
www.tv.toshiba.com
• Digital Audio Selection—Lets you
conveniently switch between audio tracks on a
digital channel (when available). This option
temporarily overrides the Primary Audio
Language option on the Sound menu.
• Primary Audio Language—Selects the
language for digital channels.
• Digital Audio Output—Opens the Digital Audio
Output menu where you can adjust digital audio.
• Audio Format—Selects the digital audio
format sent to an external audio system. You
can select:
• PCM (to convert and output sound as
PCM (pulse-code modulation) format).
• Auto (to pass through the original digital
sound).
• Audio Delay—Fine tunes the audio when it
is not in sync with the video.
• Delay adjustment—Lets you set the
amount of delay to manually sync the audio
with the video.
3 Press or to adjust the option or select a
setting, then press ENTER.
4 Press EXIT to close the menu.
57