Connecting your TV
if you have not connected electronic equipment before, or you have been frustrated in the past, you may wish to read this
section. (Cables are not supplied.)
• A coaxial cable is the standard cable that comes in from your antenna or cable
converter box. Coaxial cables use "F" connectors.
• Audio and video cables are usually color-coded according to use: yellow for
video; red and white for audio. The red audio cable is for the stereo right
channel; the white audio cable is for the stereo (or mono) left channel, if you
look at the back panel of the TV, you will see that the terminals are color-coded
in the same manner as the cables.
NOTE REGARDING
PICTURE QUALITY
When connecting video equipment, such as a VCR or DVD player:
- For GOOD picture quality: Use regular video cables.
- For BETTER picture quality: If your equipment has S-video connections,
use S-video cables instead of regular video cables.
- For BEST picture quality: If your equipment has component video
connections (ColorStream
TM
is Toshiba's brand), use component video
cables instead of regular or S-video cables. Component video cables
come in sets of three.
Note: Do not connect an S-video cable and a regular video cable to
VIDEO-1 (on the TV) at the same time. Doing so will distort the picture.
@433O
Antenna Coaxial Cable
@ ,=_N=
AUDIO/VIDEO
Cables
@
@
S-Video Cable
@
ColorStream (component video) Cable
Caution:
Do not plug in the TVpower cord until
you have finished connecting all of your
equipment.
!ik
iiii
i i
iill i_ii/_
ii
i
i ¸
Connecting
a VCR
This connection allows you to watch TV and video programs
and record one channel while watching another channel.
You will need:
• one coaxial cable
• one pair of audio cables (one single audio cable for a mono
VCR)
• one video cable (for video cable type, see "Note Regarding
Picture Quality" above).
Cable lead-in
or antenna
Stereo VCR
Note:
L OUTR
IN from
ANT
OUT
to TV
oR..- 7
c.31i I
(_UT
CH4
If you have a mono VCR,connect L/Mono to VCRAudio OUT
using only one audio cable.
The VIDEO-2jacks can be used for connecting a second piece
of video equipment, such as a DVD player or camcorder [see
"Note Regarding Picture Quality" above).
Connecting
a cable converter
box
This connection allows you to watch cable and premium
channels. Tune the TV to channel 3 or 4 (whichever channel
is vacant in your broadcast area), and then use the converter
box to change channels.
You will need:
• one coaxial cable
i!_ _i _iII
From cable
13/
_:_
,_
©
/
cocoR I
/
ANT
/
_,D_ I_,_ o __7_ I _D_O I _,_)
/
._J_7
I_J_l(_---%
|
MONO
L
I
I
MOhOI \k,2.,YJ
C--_,e /_= _oI@l@l@l@l/_
converter box
AUDIO
AUDIO
P8
AUDIO
/@
/
v,o_o,p,D=O_
_1 /
Note:
Whenyou usea converterbox with your 714, you maynot
be able to programcertain featuresusingthe remote
control,such asblocking channelsor programming your
favoritechannels.
5