JVC PD-50X795 Service Manual page 16

3.1.17 REMOVING THE FRONT FILTER (Fig.4.)
• Remove the REAR COVER.
• Remove the CHASSIS SHIELD BRACKET.
• Remove the TERMINAL COVER.
• Remove the CHASSIS BASE (with each PWB affixed on the
CHASSIS BASE).
• Remove the TEMP. SENSOR.
• Remove the MAIN POWER PWB.
• Remove the SUB POWER PWB.
• Remove the PDP UNIT.
(1) Remove the 12 screws [h], then remove the GLASS
HOLDER.
(2) Remove the FRONT FILTER with enough care not to
damage it.
GLASS HOLDER
1-16 (No.YA100)
h
i
j
i
SIDE FRAME
BRACKET
TOP
3.1.18 REMOVING THE TOP FRAME BRACKET, BOTTOM
FRAME BRACKET AND SIDE FRAME BRACKET (Fig.4.)
• Remove the REAR COVER.
• Remove the CHASSIS SHIELD BRACKET.
• Remove the TERMINAL COVER.
• Remove the CHASSIS BASE (with each PWB affixed on the
CHASSIS BASE).
• Remove the TEMP. SENSOR.
• Remove the MAIN POWER PWB.
• Remove the SUB POWER PWB.
• Remove the PDP UNIT.
• Remove the FRONT FILTER.
(1) Remove the 6 screws [i], then remove the FRONT PANEL.
(2) Remove the 4 spacers [j], the 4 screws [k], then remove
the TOP FLAME BRACKET, BOTTOM FLAME BRACKET
and SIDE FLAME BRACKET.
j
SIDE FRAME
BRACKET
TOP FRAME
i
BRACKET
BOTTOM FRAME
j
BRACKET
k
FRONT PANEL
Fig.4
i
k
j
FRONT FILTER
h