Connecting To A Camcorder; Connecting To An External Amplifier - JVC PD-50X795 Service Manual

Quick Setup

Connecting to a Camcorder

You may connect a camcorder, game console or other equipment to your television by using
the front input jacks (Input 4) located under the front panel door. To access, pull on the door
to open it. You can also connect these using the television's rear input jacks, using the same
instructions.
1) Connect a yellow composite cable from the camcorder VIDEO OUT, into the VIDEO IN on
the front of the receiver, OR connect an S-Video cable from the front of the receiver to the
camcorder.
2) Connect a white composite cable from the camcorder LEFT AUDIO OUT, into the
LEFT AUDIO IN on the front of the receiver.
3) Connect a red composite cable from the camcorder RIGHT AUDIO OUT, into the
RIGHT AUDIO IN on the front of the receiver.
Note:
• If your camcorder is a mono sound model it will have only one AUDIO OUT. Connect it to the
LEFT AUDIO IN on the front of the receiver.

Connecting to an External Amplifier

Subwoofer Out - Use a powered subwoofer with the surround feature to simulate a home
theater system. Simply connect the subwoofer to the back of the receiver.
Receiver Rear Panel
AUDIO
OUT
R
1) Connect a white composite cable from the LEFT AUDIO OUTPUT on the back of the
receiver to the LEFT AUDIO INPUT on the amplifier.
2) Connect a red composite cable from the RIGHT AUDIO OUTPUT on the back of the
receiver to the RIGHT AUDIO INPUT on the amplifier.
3) Connect a black composite cable from the SUBWOOFER OUT on the back of the receiver
to the LINE INPUT of the subwoofer.
Notes:
• Refer to your amplifier's manual for more information.
• You can use AUDIO OUTPUT for your home theater system.
22
S-VIDEO
AUDIO
VIDEO
L/MONO R
OVER
INPUT-4
OR
Receiver front Panel
SUB WOOFER
OUT
AUDIO L VIDEO
S-VIDEO
MONITOR / REC OUT
Speaker
Powered
Subwoofer
Connections
CAMCORDER
Speaker
Amplifier