Advertisement
AFTER SPRAYING
1. Dispose of any surplus spray mix ac-
cording to the product approval. Store
products safely, locked up and out of the
reach of children.
2. It is essential to clean the sprayer and
bottle or backpack thoroughly using water
and detergent after use. Never immerse
the spray head in water or under a tap,
since this will destroy the electric motor.
A water and detergent mix should be put in the bottle, swilled around, and then
sprayed out onto the treated area or an area of waste ground. The sprayer and bottle
should be wiped down externally using a cloth.
3. Periodically remove the atomiser cone housing and remove and clean the atomiser
disc.
To do this first remove the feed nozzle by
pulling it out of the bottom of the atomiser
cone housing (1). Then remove the atomiser
cone housing by rotating it an eighth of a
turn clockwise (as viewed from above) to
unlock the bayonet keyhole fitting (2) and
pull it away from the bottom of the motor
housing (3).
The atomiser disc can be removed from the
atomiser cone housing and cleaned in soapy
water using a soft brush.
14
Advertisement
