After Spraying; Storage - Micron Herbi-4 CDA Instruction Manual

AFTER SPRAYING

1. Dispose of any surplus spray mix according to the product approval. Store products
safely, locked up and out of the reach of children.
2. It is essential to clean the sprayer and tank thoroughly using water and detergent
after use. Never immerse the spray head in water or under a tap, since this will
destroy the electric motor. A water and detergent mix should be put in the tank,
swilled around, and then sprayed out onto the treated area of waste ground. The
sprayer and tank should be wiped down externally using a cloth. Periodically
remove the atomiser disc with a pair of pliers and clean with a soft brush.
10
3. After working with agrochemicals, or handling spraying equipment,
thoroughly wash hands and exposed skin. All protective clothing should be washed
separately from other clothing and stored. Contaminated gloves should be washed
inside and out.

STORAGE

Before storing the HERBI-4 for long periods disassemble the sprayer by removing the
four screws in the battery case and clean all electrical contacts with a wire brush or
similar. Reassemble and with the sprayer in the collapsed position i.e. batteries
removed, store in a dry place away from direct sunlight. Batteries should be stored in a
dry cool place.
remove batteries
clean switch
contacts
always
clean terminals
check spring
11