Table of Contents
Advertisement
6. Identify the Right Handrail (84).
Attach the Right Handrail (84) to the Right
Upright (90) with two 5/16" x 2 1/4" Screws (28)
and two 5/16" Star Washers (11); start both
Screws, and then tighten them. Make sure
not to pinch the Upright Wire (81).
Attach the Left Handrail (not shown) to the
Left Upright (not shown) in the same way.
Note: There are no wires on the left side.
7. Set the Console Base (64) face down on a soft
surface to avoid scratching the Console Base.
Do not lift the Console Base by the pulse
grips.
Remove and save the four 1/4" x 1/2"
Screws (2).
Identify the Left Tray (105). Attach the Left Tray
with four #8 x 1/2" Screws (1).
Attach the Right Tray (106) in the same way.
6
84
7
1
106
2
Pulse
Grips
10
28
11
81
90
64
1
105
2
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the sport 7.0 and is the answer not in the manual?
Questions and answers
Where can I get the tablet holder for this unit.
The manual states that to purchase a tablet holder for the Pro-Form Sport 7.0, you should refer to the front cover of the manual.
This answer is automatically generated