Chapter 3
3.2 Assembly and Disassembly
3.2.1 Disassembly/Assembly
As a rule, refer to the Parts Catalog for instructions on how to disassemble and assemble the machine. The
discussions that follow are limited to those components that are thought to require replacement relatively more often
than others.
3.2.2 Basic Disassembly
(1) Remove Multi-purpose tray.
(2) Remove 5 screws (a), and detach the rear cover.
MP390: detach claws and remove the speaker.
Multi-purpose tray
F-3-1
(3) Lift the scanner unit and insert a precision flat bladed screwdriver in an upright posture in a narrow gap between
the right front cover and the right side cover. Exert an outward pressure by twisting the screwdriver to detach the
claw (b). Then detach two claws (c) in descending order.
3-6
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
Rear cover
a
0002-0424
0002-5250