Web User Interface Reference
PHY_MODE_PC
Value Format
Description
Value Range
Default Value
Web User Interface Reference
VLAN_ENABLE
Value Format
Description
Value Range
Default Value
Web User Interface Reference
VLAN_ID_IP_PHONE
Value Format
Description
Value Range
Default Value
Web User Interface Reference
Document Version 2015-07
LAN Port (Page 82)
INTEGER
Specifies the link speed and duplex mode of the PC port.
•
1: Auto
•
2: 100Mbps/Full Duplex
•
3: 100Mbps/Half Duplex
•
4: 10Mbps/Full Duplex
•
5: 10Mbps/Half Duplex
1
PC Port (Page 82)
BOOLEAN
Specifies whether to use the VLAN feature to perform VoIP
communication securely.
Note
•
You should specify "Y" for only one of "LLDP_ENABLE" or
"VLAN_ENABLE".
If "Y" is specified for two or more of the parameters above, the
settings are prioritized as follows: "VLAN_ENABLE" >
"LLDP_ENABLE". Therefore, if "Y" is specified for both
"VLAN_ENABLE" and "LLDP_ENABLE", the VLAN-related
settings are used.
•
Y (Enable)
•
N (Disable)
N
Enable VLAN (Page 84)
INTEGER
Specifies the VLAN ID for this unit.
0–4094
2
IP Phone VLAN ID (Page 84)
5.3.3 Ethernet Port Settings
Administrator Guide
191