Rtcp_Enable_N - Panasonic KX-HDV230 Administrator's Manual

Description
Value Range
Default Value

RTCP_ENABLE_n

Parameter Name Example
Value Format
Description
Value Range
Default Value
Web User Interface Reference
RTCP_INTVL_n
Parameter Name Example
Value Format
Description
Value Range
Default Value
Web User Interface Reference
RTCP_SEND_BY_SDP_n
Parameter Name Example
Value Format
Description
Value Range
Document Version 2015-07
Specifies the diagnose level for received RTP.
•
0: diagnose destination IP Address and port
•
1: diagnose destination IP address
•
2: diagnose destination port
•
3: diagnose nothing
0
RTCP_ENABLE_1, RTCP_ENABLE_2, ..., RTCP_ENABLE_6
BOOLEAN
Specifies whether to enable or disable RTCP (Real-Time Transport
Control Protocol). For details, refer to RFC 3550.
•
Y (Enable RTCP)
•
N (Disable RTCP)
N
Enable RTCP (Page 135)
RTCP_INTVL_1, RTCP_INTVL_2, ..., RTCP_INTVL_6
INTEGER
Specifies the interval, in seconds, between RTCP/RTCP-XR packets.
5–65535
5
RTCP&RTCP-XR Interval (Page 135)
RTCP_SEND_BY_SDP_1, RTCP_SEND_BY_SDP_2, ...,
RTCP_SEND_BY_SDP_6
INTEGER
Specifies whether to send RTCP signals by SDP (Session Description
Protocol).
0–1
–
0: Send RTCP signals using the value specified in
"RTCP_INTVL_n", if the "RTCP_ENABLE_n" parameter is enabled.
–
1: Send RTCP signals using the value specified in the SDP attribute
"a=rtcp:".
5.3.26 RTP/RTCP/RTCP-XR Settings
Administrator Guide 273