Panasonic KX-HDV230 Administrator's Manual page 323

The following types of flexible keys are available:
Button
One Touch Used to dial a previously set phone number with
Dial one touch.
BLF (Busy Used to show the current status of another
Lamp Field) extension, call the extension and transfer calls to
it.
Note
Line Used to seize a line in order to make or receive
a call. The LED of the function key indicates the
status of the line.
ACD Used to log in or log out of a group when ACD
*1
(Automatic Call Distribution) is enabled.
Note
Document Version 2015-07
Description
•
It may be necessary to specify the
Resource List URI to use this feature,
depending on your phone system (® see
[Resource List URI] in 4.6.2.1 Call
Features in the Web user interface or
"RESOURCELIST_URI_n" in 5.3.34 Call
Control Settings in the configuration
file).
•
Specify the number assigned to a BLF for
performing call pickup (® see [Directed
Call Pickup] in 4.6.1.1 Call Control in
the Web user interface or
"NUM_PLAN_PICKUP_DIRECT" in
5.3.30 Telephone Settings in the
configuration file).
•
It is necessary to set the ACD feature to
enable (® see [Enable ACD] in
4.3.10 ACD Settings [Line1]–[Line6] in
the Web user interface or
"ACD_ENABLE_n" in 5.3.14 Call Center
Settings in the configuration file).
Lamp Indication
–
Off: The BLF extension is idle.
Red on: A corresponding BLF extension
is using the line.
Flashing red rapidly: The BLF
extension is receiving an incoming call.
Off: The line is idle.
Blue on: The line is on a call.
Flashing blue slowly: A call is on hold.
Flashing blue rapidly: A call (including
Hold Recall) is being received to the line
(or a shared line).
Red on: A shared line is in use or a call
is on private hold at another unit.
Flashing red slowly: A shared line is on
hold at another unit.
Off: Logged in
Red on: Logged out
Administrator Guide
6.3 Flexible Keys
323