About This Manual - Simrad IS80 Heading Repeater HR80 User Manual

2 | HR80 Heading Repeater

About this manual

This manual is a reference guide for installing and
operating the Simrad HR80 Instrument.
The manual does not include installation procedures for
sensors that can be connected to the system.
In this manual, names of modes and keys are written in
boldface (e.g. User setup, Mode/Setup key).
In the illustrations throughout the manual the following
symbols are used:
3 s
3 s
SELECT
3 s
MODE +
SETUP SELECT
SELECT
A. 1
1 s
0FFS
Important text that requires special attention from the
reader is emphasized as follows:
Used to draw the reader's attention to a comment or
some important information.
When necessary, used to warn personnel they
should proceed carefully to prevent risk of injury
and/or damage to equipment.
Time indication (1, 3, 5 or 10
seconds)
Single key press with time
indication
Combined key press with time
indication
Repeated key presses on single
key
A.2
Automatic change in LCD readings
with time indication (no key
presses required)