Removal From Pallet And Cooker Installation - AGA CITY60 CONTEMPORARY Installation Manual

REMOVAL FROM PALLET AND COOKER INSTALLATION

Removing of transit brackets - Unscrew 4 screws and
remove brackets, from front and two screws from rear.
Fig. 1
Once appliance is in position in kitchen, remove sack
truck and straps. The front stability feet can be raised
with a spanner to allow appliance to be slid from transit
pallet.
Fig. 3
DESN 516890
STABILITY FOOT
DESN 516892
4
NOTE: Care must be taken not to trap mains cable.
MAINS
CABLE
Appliance to be removed from rear of pallet
only.
Recess provided for suitable sack truck.
Appliance to be secured to sack truck with
suitable straps (shaded area)
Fig. 2
Slide cooker off transit pallet. Take care not to trap
mains cable.
Fig. 4
DESN 516891
DESN 516893