Jenn-Air S136 Use And Care Manual page 37

8. At end of time set, ovenwill stop automaticallyand not beep.
9. After the LOCK INDICATOR LIGHT goes out, movethe DOOR LOCK LEVER
to the left. The ovendoor can now be opened.
10. Turn the SELECTOR AND TEMPERATURE knobs from CLEAN to OFF after
the door is unlocked.
IMPORTANT: IF THE TEMPERATURE KNOB IS TURNED TO OFF BEFORE
THE DOOR IS UNLOCKED, THE DOOR WILL NOT OPEN. Forcing the lock
will damagethe lock mechanism. Return TEMPERATUREknob to CLEAN, unlock
the door, then turn TEMPERATURE knob OFF.
NOTE: A fan comes on whenever the SELECTOR knob is set on CLEAN; there-
fore, the fan will continue to operate at the end of the cleaning process until
the SELECTOR knob is turned OFF. The fan will also start as soon as the
controls are setfor a delayed start of the self-cleaning process,
To eheck ST_llCT '][I_BI_before elesnlng begins: Hold in START TIME
button until the words START TIME appear in the Display Window. The start time
will be displayedbriefly,then Display will returnto time of day.
To change START TIME before cleaning begins:
1. Hold in START TIME button until the words START TIME appear in the Display
Window.
2. Turn SET dial to time desired.
3. Push ENTERbutton to enter new start time.
The indicator words STOP TIME and a new stop time will appear in Display
Window. The newstop time will be 21,_ hours later than the new start time,
For a heavily soiled oven, the stop time will need to be changed by turning the
SET dial,
4. Push ENTERbutton to enter new stop time.
To eheek STOP TIME: Hold in STOP TIME button until the words STOP TIME
appear in the Display Window. The stop time will be displayed briefly, then Display
will return to on-going program.
To change STOP TIME before ele_,.I,,_ begins:
1. Hold In STOP TIME buton until wordsSTOP TIME appear in the Diaplay Window.
2. Turn SET dial to desiredSTOP TIME.
37