Product Information & Specifications - Intex CS8110 Owner's Manual

HOW THE CHLORINE IS GENERATED
This product is specially designed for above ground pools. It will destroy the bacteria, oxidize
bather organics and control algae, which provide a safe, clean and comfortable swimming pool.
Common salt (sodium chloride) is made up of two elements, sodium and chloride. During the
installation of your Saltwater System, a measured quantity of salt is dissolved in the pool water
to make it slightly salty. The pool water flows through the Saltwater System 's electrolytic cell to
produce chlorine. The chlorine dissolves in the water and instantly starts destroying bacteria and
algae. It also oxidizes all other organic materials.
HOW COPPER IONS ARE GENERATED
Low voltage direct current is applied to the copper electrode, and copper ions are generated
and dissolved instantly in the water. Copper is an effective algaecide, which will prevent algae
from growing in the pool.
PRODUCT SPECIFICATIONS
Power:
Amperage:
Wattage:
Ideal Salt Level:
Maximum Chlorine Output/hour:
Copper Ionizer Output Current:
Filter pump minimum flow rate:
Limited Warranty:
Power Switch
Electronic
Control Station
SAVE THESE INSTRUCTIONS
(131) MODEL CS8110 SALTWATER SYSTEM ENGLISH 7.5" X 10.3" PANTONE 295U 06/28/2013
110 - 120 Volt AC
1.1A
125W
3000 ppm (parts per million)
12 grams/hour
175 mA
700 ~ 4000 gallons/hour (2650 - 15140 liters/hour)
see "Limited Warranty"
Electrolytic Cell
Hose Returning
Water to Pool
Copper electrodes
Flow Sensor
Hose from
Filter Pump
Power Supply
English
131
Page 6