Intex CS8110 Owner's Manual page 9

SETUP INSTRUCTIONS (continued)
Connecting the system to pump and pool with 1-1/2" (38mm) connections/hoses:
Pump and pool with 1-1/2" (38mm) connections do not require the adaptors A (1) or B (9).
Install as follows:
Drawing #2
WATER TO
POOL
ID 1-1/2" (38mm)
HOSE
1. Go directly to step 2 if your pool is empty. If your above-ground-pool is filled with water,
close the plunger valves before installing the Saltwater System.
2. Disconnect the water return hose from the filter pump connection and connect it to the
Saltwater System outlet.
3. Connect the connector hose (8) to the filter pump outlet connection.
4. Open the plunger valves to allow the water to flow.
SAVE THESE INSTRUCTIONS
(131) MODEL CS8110 SALTWATER SYSTEM ENGLISH 7.5" X 10.3" PANTONE 295U 06/28/2013
SWIMMING POOL
8
SALTWATER
SYSTEM
PLUNGER
VALVE
WATER FROM
POOL
FILTER
PUMP
ID 1-1/2" (38mm)
HOSE
English
131
Page 9