Product Information & Specifications - Intex 26669EG Owner's Manual

HOW THE CHLORINE IS GENERATED
This product is specially designed for above ground pools. It will destroy the bacteria, oxidize
bather organics and control algae, which provide a safe, clean and comfortable swimming pool.
Common salt (sodium chloride) is made up of two elements, sodium and chloride. During the
installation of your Saltwater System, a measured quantity of salt is dissolved in the pool water
to make it slightly salty. The pool water flows through the Saltwater System 's electrolytic cell to
produce chlorine. The chlorine dissolves in the water and instantly starts destroying bacteria and
algae. It also oxidizes all other organic materials.
HOW THE ELECTROCATALYTIC OXIDATION WORKS
The Electrocatalytic Oxidation (E.C.O.) is an Advanced Oxidation Processes (AOPs). When
direct current is applied to the electrocatalytic oxidation electrodes, water will be discharged to
generate "hydroxyl radicals". The hydroxyl radical is a powerful oxidant, which oxidizes organic
contaminants, and destroys bacteria and algae. Hydroxyl radicals in combination with free
available chlorine provide the strongest and safest pool water sanitation.
PRODUCT SPECIFICATIONS
Model:
Power
Amperage
Wattage:
Ideal Salt Level:
E.C.O. Cell Output Current:
Maximum Chlorine Output/hour:
Filter pump minimum flow rate:
Limited Warranty:
Power Switch
Electronic
Control Station
SAVE THESE INSTRUCTIONS
(260PO) MODEL ECO7110&8110 SALTWATER SYSTEM ENGLISH 7.5" X 10.3" PANTONE 295U 05/15/2015
ECO7110
110 - 120 Volt AC
0.6 A
65 W
3000 ppm (parts per million)
500 mA
5 grams/hour
700 ~ 3000 gallons/hour
(2650 - 11355 liters/hour)
see "Limited Warranty"
Hose Returning
Electrolytic Cell
Water to Pool
English
ECO8110
110 - 120 Volt AC
1.1 A
125 W
3000 ppm (parts per million)
800 mA
12 grams/hour
700 ~ 3000 gallons/hour
(2650 - 11355 liters/hour)
Flow Sensor
Hose from
Filter Pump
E.C.O.
Electrodes
Power Supply
Page 6
260
PO