Advertisement

(130PO) MINI SALTWATER SYSTEM ENGLISH 7.5" X 10.3" PANTONE 295U 05/31/2021
Krystal Clear™ Saltwater System
Certified Model Number CS2110
For illustrative purposes only.
Don't forget to try these other fine Intex products: Pools, Pool
Accessories, Inflatable Pools and In-Home Toys, Airbeds and
Boats available at fine retailers or visit our website listed below.
Due to a policy of continuous product improvement, Intex
reserves the right to change specifications and appearance,
which may result in updates to the instruction manual without
notice.
DO NOT RETURN PRODUCT TO STORE
To purchase parts and accessories or to obtain non-technical assistance, Visit
For technical assistance, missing parts or warranty claims call (for U.S. and Canadian Residents):
Monday through Friday, 8:30am to 5:00pm Pacific Time
IMPORTANT
SAFETY RULES
Read, understand, and follow
all instructions carefully before
installing and using this product.
IMPORTANT!
www.intexcorp.com
1-310-549-8235
130
English
English
PO
130-*PO-R0-2205

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CS2110 and is the answer not in the manual?

Questions and answers

Summary of Contents for Intex CS2110

  • Page 1 Krystal Clear™ Saltwater System Certified Model Number CS2110 For illustrative purposes only. Don’t forget to try these other fine Intex products: Pools, Pool Accessories, Inflatable Pools and In-Home Toys, Airbeds and Boats available at fine retailers or visit our website listed below.
  • Page 2: Table Of Contents

    Intex Pools Salt Table............7 Intex Pools Cyanuric Acid Table..........8 Intex Pools Operating Time Table........9 Non-Intex Pools Salt Table........... 10 Non-Intex Pools Cyanuric Acid Table......... 10 Non-Intex Pools Operating Time Table........10 Operating Instructions............11 LED Code Chart..............12 Maintenance................12-13 Long Term Storage...............
  • Page 3: Warnings

    (130PO) MINI SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 05/31/2021 English IMPORTANT SAFETY RULES Read, Understand and Follow All Instructions Carefully Before Installing and Using this Product. READ AND FOLLOW ALL INSTRUCTIONS WARNING • This Saltwater System is designed only to produce sodium hypochlorite. It does not monitor or control sodium hypochlorite levels in the pool.
  • Page 4: Parts References

    ELECTROLYTIC CELL NUT 13095 TEST STRIPS 19635 When ordering parts, be sure to quote the model number and part numbers. PRODUCT SPECIFICATIONS Certifi ed Model Number: CS2110 Power: 110 - 120 Volt AC Amperage: 0.3 A Wattage: 20 W Ideal Salt Level:...
  • Page 5: Setup Instructions

    (130PO) MINI SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 05/31/2021 English SETUP INSTRUCTIONS Please visit www.intexdevelopment.com/support/videos for the latest instructional video on the installation and operation of this product. IMPORTANT • The Saltwater System requires a separate filter pump [300~1000 gph (1136~3785 lph)] to drive the water and function properly.
  • Page 6: Salt & Pool Water Volumes

    (130PO) MINI SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 05/31/2021 English SALT & POOL WATER VOLUMES • Which kind of salt to use: Use only Sodium Chloride Salts Use only sodium chloride (NaCl) salt that is at least 99.8% pure. It is also acceptable to use water conditioning salt pellets (the compressed forms of evaporated salt).
  • Page 7: Intex Pools Salt Table

    Low Salt Detected Pool Size for Easy Set & Oval Pool) 3.0g/L (3000ppm) (CODE “91”) (Gals) (Liters) (Lbs) (Kgs) (Lbs) (Kgs) INTEX ABOVE GROUND POOLS (AGP’s) 244cmx61cm (8’x24”) 1942 244cmx76cm (8'x30") 2419 EASY SET ® 305cmx61cm (10’x24”) 3077 POOL 305cmx76cm (10'x30") 1018 3853 366cmx76cm (12'x30")
  • Page 8: Intex Pools Cyanuric Acid Table

    (130PO) MINI SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 05/31/2021 English INTEX POOLS CYANURIC ACID TABLE Cyanuric acid is a chemical that reduces the loss of chlorine in water due to ultraviolet rays. To maintain the pool water clear and clean, and to maximize the performance of the device, add cyanuric acid to the pool.
  • Page 9: Intex Pools Operating Time Table

    The filter pump running time should be 1 hour longer than the required operating time of the Saltwater System. NOTE: If an Intex fi lter pump has a timer on the GFCI, the maximum run time is 10 hours. The timer will need to be manually reset in order to extend the operating time.
  • Page 10: Non-Intex Pools Salt Table

    5678 1750 6624 2000 7570 2200 8327 OPERATING TIME TABLE FOR COMMON NON - INTEX POOLS (WITH CYANURIC ACID) Operating Time (hours) at different ambient/air temperatures Recommend Filter Water Capacity pump Operating (Gals) (Liters) 10 - 19°C (50 - 66°F) 20 - 28 °C (68 - 82°F)
  • Page 11: Operating Instructions

    (130PO) MINI SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 05/31/2021 English OPERATION INSTRUCTIONS 1. Turn on the filter pump. 2. Start up the unit: Plug the power cord into the electrical outlet and test the household socket GFCI (circuit breaker). Press button.
  • Page 12: Led Code Chart

    (130PO) MINI SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 05/31/2021 English LED CODE CHART LED Reading Definitions Stand-By Mode (Start-up) Minimum Operating Hour (1 hour remaining) 02 - 11 Operating Hours (2 - 11 hours remaining) Maximum Operating Hours (12 hours remaining) Alarm Code (Low Pump Flow / No Flow) Alarm Code (Low Salt Level) Alarm Code (High Salt Level)
  • Page 13: Maintenance

    (see drawing 6). 7. Reverse steps 3, 4, 5 and 6 to reconnect the electrolytic cell. TEST STRIPS ( PACKED WITH THE PRODUCT ) INTEX ® The Test Strips can test the “Free Chlorine”, “pH”, “Calcium Hardness” and “Total Alkalinity”...
  • Page 14: Pool Maintenance And Chemical Definitions

    (130PO) MINI SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 05/31/2021 English POOL MAINTENANCE & CHEMICAL DEFINITIONS Preferred Water Chemistry Reading Minimum Ideal Maximum Free Chlorine 1.0 - 3.0 ppm 5.0 ppm Combined Chlorine 0 ppm 0.2 ppm 7.4 - 7.6 Total Alkalinity 40 ppm 80 ppm...
  • Page 15: Troubleshooting Guide

    • Find out the switch and turn on. • Household socket GFCI has not • Reset the household socket GFCI. reseted. • Contact Intex Service Center. • A power fuse has blown. • Contact Intex Service Center. • LED failure.
  • Page 16 • Ensure that the cell cord is plugged firmly into 3. Electrolytic cell cord is loose. the cell housing receptacle. 4. Possible electrolytic cell failure. • Contact Intex Service Center. Replace the cell if needed. 1. High salt level. • Partially drain the pool and refill it with fresh 2.
  • Page 17: Limited Warranty

    Service Center. Upon receipt of the returned product, the Intex Service Center will inspect the item and determine the validity of the claim. If the provisions of this warranty cover the item, the item will be repaired or replaced at no charge.

This manual is also suitable for:

Krystal clear qs200

Table of Contents