Intex CS8110 Owner's Manual page 10

SETUP INSTRUCTIONS (continued)
Connecting the system to other types of pump (with different type of thread or no
thread):
The Saltwater System can also be adapted to other filter pumps with different thread or those
without a thread on the connection.
Connection to 1-1/4" (32mm) hose:
SALTWATER SYSTEM
1. Connect one end of adaptor B (9) to the connector hose (8). Tighten securely.
2. Now, connect the other end of adaptor B (9) to the filter pump outlet. Tighten securely.
Connection to 1-1/2" (38mm) hose with clamp:
SALTWATER SYSTEM
1. Connect the connector hose (8) to the filter pump outlet connection with a large hose
clamp. Tighten securely.
SAVE THESE INSTRUCTIONS
(131) MODEL CS8110 SALTWATER SYSTEM ENGLISH 7.5" X 10.3" PANTONE 295U 06/28/2013
9
8
ID 1-1/4" (32mm)
CONNECTION
LARGE HOSE
8
CLAMP
ID 1-1/2" (38mm)
CONNECTION
English
FILTER PUMP
FILTER PUMP
Page 10
131