Intex Krystal Clear SF90220-1 Owner's Manual

Sand filter pump

Hide thumbs

Table Of Contents

(341IO) MODEL SF90220-1 SAND FILTER PUMP ENGLISH 7.5" X 10.3" PANTONE 295U 05/23/2019

Krystal Clear

Model SF90220-1

220 - 240 V~, 50 Hz, 190 W

Hmax 3.0 m, Hmin 0.19 m, IPX4

Max. Water Temperature 35 °C

For illustrative purposes only.

Don't forget to try these other fine Intex products: pools, pool

accessories, inflatable pools and in-home toys, airbeds and boats

available at fine retailers or visit our website.

Due to a policy of continuous product improvement, Intex reserves

the right to change specifications and appearance, which may

result in updates to the instruction manual without notice.

®™ Trademarks used in some countries of the world under license from/®™ Marques utilisées dans certains pays sous

licence de/Marcas registradas utilizadas en algunos países del mundo bajo licencia de/Warenzeichen verwendet in einigen

Ländern der Welt in Lizenz von/Intex Marketing Ltd. to/à/a/an Intex Development Co. Ltd., G.P.O Box 28829, Hong

Kong & Intex Recreation Corp., P.O. Box 1440, Long Beach, CA 90801 • Distributed in the European Union by/Distribué

dans l'Union Européenne par/Distribuido en la unión Europea por/Vertrieb in der Europäischen Union durch/Intex Trading

B.V., Venneveld 9, 4705 RR Roosendaal – The Netherlands

www.intexcorp.com

IMPORTANT

SAFETY RULES

Please read, understand, and follow all

instructions carefully before installing

and using this product. Keep for future

reference.

Sand Filter Pump

Rechte vorbehalten. Printed in China/Imprimé en Chine/Impreso en China/

Gedruckt in China.

English

341A

341-*A*-R0-2005

Table of Contents

Summary of Contents for Intex Krystal Clear SF90220-1

Page 1 Ländern der Welt in Lizenz von/Intex Marketing Ltd. to/à/a/an Intex Development Co. Ltd., G.P.O Box 28829, Hong Kong & Intex Recreation Corp., P.O. Box 1440, Long Beach, CA 90801 • Distributed in the European Union by/Distribué dans l’Union Européenne par/Distribuido en la unión Europea por/Vertrieb in der Europäischen Union durch/Intex Trading B.V., Venneveld 9, 4705 RR Roosendaal –...
Page 2: Table Of Contents
Warnings..................3 Parts References................Setup Instructions................ 6-13 Product Specifications..............Operating Instructions..............14-16 Intex Pools Operating Time Table..........17 Non-Intex Pools Operating Time Table........18 Maintenance.................. Long Term Storage................ 19 Troubleshooting Guide..............20 Common Pool Problems............... 21 General Aquatic Safety..............21 Limited Warranty................
Page 3: Warnings
(341IO) MODEL SF90220-1 SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 05/23/2019 English 341A IMPORTANT SAFETY RULES Read, Understand and Follow All Instructions Carefully Before Installing and Using this Product. READ AND FOLLOW ALL INSTRUCTIONS WARNING • Always supervise children and those with disabilities. •...
Page 4: Parts References
(341IO) MODEL SF90220-1 SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 05/23/2019 English 341A PARTS REFERENCE Before assembling your product, please take a few minutes to check the contents and become familiar with all the parts. 23 24 23 24 41 30 29 31 "...
Page 5 (341IO) MODEL SF90220-1 SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 05/23/2019 PARTS REFERENCE Before assembling your product, please take a few minutes to check the contents and become familiar with all the parts. REF. NO. DESCRIPTION QTy. SPARE PART NO. PRESSURE GAUGE 11720 TANK COVER &...
Page 6 (341IO) MODEL SF90220-1 SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 05/23/2019 English 341A POOL OUTLET - STRAINER & PLUNGER VALVE SETUP (optional) The strainer grid prevents large objects from jamming and/or damaging the filter pump. If your pool has an inflatable top ring, install the strainer, nozzle and plunger valve before inflating the pool liner top ring.
Page 7 (341IO) MODEL SF90220-1 SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 05/23/2019 English 341A POOL INLET - NOZZLE & PLUNGER VALVE SETUP (optional) 1. In a counter-clockwise motion unscrew plunger valve union from the inlet threaded air connector (39) (see drawing 5).
Page 8: Setup Instructions
(341IO) MODEL SF90220-1 SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 05/23/2019 English 341A PRODUCT SPECIFICATIONS The sand filter removes suspended particles but does not sanitize your pool. Pool chemistry is a specialized area and you should consult your local pool service specialist for details.
Page 9 (341IO) MODEL SF90220-1 SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 05/23/2019 English 341A SETUP INSTRUCTIONS (continued) In a clockwise motion screw the center pipe (7) onto the filter grid (8) securely by hand (see drawing 11.2). Vertically insert the filter grid and center pipe assembly into the tank. Ensure filter grid assembly is securely fitted to the bottom of the tank, and the center pipe is vertically centered inside the tank (see drawing 11.3).
Page 10 (341IO) MODEL SF90220-1 SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 05/23/2019 English 341A SETUP INSTRUCTIONS (continued) WARNING Improper tank valve and clamp assembly could cause the valve and clamp to blow off and cause serious injury, property damage or death. 6-way valve installation: Make sure the tank o-ring (5) is in place (see drawing 16).
Page 11 (341IO) MODEL SF90220-1 SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 05/23/2019 English 341A SETUP INSTRUCTIONS (continued) Motor installation: Place an L-shape o-ring (18) on the pump motor outlet. In a clockwise motion connect the sand filter interconnecting hose (13) to the pump motor outlet (see drawing 20). Connect the pump motor unit to the tank support base (see drawing 21.1).
Page 12 (341IO) MODEL SF90220-1 SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 05/23/2019 English 341A SAND FILTER PUMP HOSE CONNECTION SETUP WARNING • Keep this product more than 2 m away from the pool. • Keep this product more than 3.5 m away from the pool (for France only). • Keep the plug of this product more than 3.5 m away from the pool. • Position this product away from the pool, so as to prevent children from climbing on it and accessing the pool. The 6-way valve has three hose connection ports. 1.
Page 13 Connect the hose (12) to the pool inlet/outlet connection with a large hose clamp. Tighten securely. LARGE HOSE CLAMP POOL For INTEX pool with 1-1/4” (32mm) connections/hoses: Make sure the air jet valve (38) is securely tighten onto the pool inlet air adaptor (40) and facing (Adaptor B) (Adaptor B) SAVE THESE INSTRUCTIONS...
Page 14: Operating Instructions
(341IO) MODEL SF90220-1 SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 05/23/2019 English 341A OPERATING INSTRUCTIONS WARNING • Risk of electric shock. Connect this product only to a grounding type receptacle protected by a ground-fault circuit interrupter (GFCI) or residual current device (RCD). Contact a qualified electrician if you cannot verify that the receptacle is protected by a GFCI/RCD. Use a qualified electrician to install the GFCI/RCD, which has a maximum rate of 30mA.
Page 15 “BACKWASH” under “initial startup and operation” section. Vacuuming device (i.e. Intex auto pool cleaner) attached to the system may also cause the flow to diminish and the pressure to rise. Remove any vacuuming device from the system and check if the pressure gauge reading has dropped from the yellow zone to the green zone.
Page 16 (341IO) MODEL SF90220-1 SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 05/23/2019 English 341A OPERATING INSTRUCTIONS (continued) Operating the system under “TIMER” mode or manually: To operate the sand filter pump in “FILTER” mode under “TIMER” control: 1. Activate the unit: Press button.
Page 17: Intex Pools Operating Time Table
This table shows the required operating time for average use of the sand filter pump with above ground pools. If the system is attached to an “Intex Saltwater System” unit, the filter pump running time should be longer than the required operating time of the Intex Saltwater System unit.
Page 18: Non-Intex Pools Operating Time Table
(341IO) MODEL SF90220-1 SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 05/23/2019 English 341A NON-INTEX POOLS OPERATING TIME TABLE This table shows the required operating time for average use of the sand filter pump with above ground pools. Sand filter pump operating...
Page 19: Maintenance
(341IO) MODEL SF90220-1 SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 05/23/2019 English 341A POOL CARE & CHEMICALS • All pools require care to keep the water clear and hygienically clean. With proper chemical control, your filter will help attain this objective. Consult your pool supply dealer for instructions regarding the proper use of chlorine, algaecide and other chemical agents required for sparkling clear water.
Page 20: Troubleshooting Guide
• An air leak on the intake hose. • Tighten hose nuts, check hose for damage. • Faulty motor or the impeller is jammed. • Contact Intex service center. 6-WAY VALVE/ • Sand tank o-ring missing. • Remove 6-way valve cover and ensure the COVER LEAKING o-ring is in place.
Page 21: Common Pool Problems
• Finger tighten all caps. • The drain valves are loose. SEDIMENT ON • Dirt or sand on pool • Heavy use, getting in and • Use Intex pool vacuum to clean POOL BOTTOM floor. out of pool. of pool.
Page 22: Limited Warranty
Other than this warranty, and other legal rights in your country, no further warranties are implied. To the extent possibly in your country, in no event shall Intex be liable to you or any third party for direct or consequential damages arising out of the use of your Sand Filter Pump, or Intex or its agents’...

Intex Krystal Clear SF90220-1 Owner's Manual

Table of Contents

Related Manuals for Intex Krystal Clear SF90220-1

Summary of Contents for Intex Krystal Clear SF90220-1

Table of Contents