About This Manual - H3C S5120-SI Series Installation Manual

About This Manual

Organization
H3C S5120-SI Series Ethernet Switches Installation Manual is organized as follows:
Chapter
1 Product Overview
2 Installation Preparations
3 Installing a Switch
4 Initial Power-On
5 Loading Software
6 Maintenance and
Troubleshooting
Appendix
Conventions
The manual uses the following conventions:
GUI conventions
Convention
< >
[ ]
/
Symbols
Convention
Briefly introduces the appearance, system description, as well as the
features and applications of the S5120-SI series switches.
Describes the requirements on installation site, the safety
recommendations before and during installation, and the required
tools.
Covers the procedures for installing the S5120-SI series switches,
ground wire connection, power module installation, interface module
installation, and so on.
Helps you get familiar with the basic knowledge of how to boot and
configure the S5120-SI series switches, including device startup,
power-on, and initialization of system files, and so on.
Introduces how to load Boot ROM and host software for an S5120-SI
series switch
Introduces the problems that might occur during the installation and
the booting of an S5120-SI series switch and the related solution.
Appendix A: Lightning protection of the S5120-SI series switches.
Appendix B: Provides Compliance and safety manual.
Button names are inside angle brackets. For example, click <OK>.
Window names, menu items, data table and field names are inside
square brackets. For example, pop up the [New User] window.
Multi-level menus are separated by forward slashes. For example,
[File/Create/Folder].
Means reader be extremely careful. Improper operation may cause
bodily injury.
Means reader be careful. Improper operation may cause data loss or
damage to equipment.
Means a complementary description.
Contents
Description
Description