10/100/1000Base-T Ethernet Port; 1000Base-X Sfp Interface - H3C S5120-SI Series Installation Manual

Table 1-2 Console port specifications
Item
Connector type
Compliant standard
Transmission baud rate
Service

10/100/1000Base-T Ethernet Port

Each S5120-SI series provides 10/100/1000Base-T Ethernet ports on its front panel. Quantity of
Ethernet ports varies with the device model, see Table 1-1 for details.
Table 1-3 describes the specifications of the 10/100/1000Base-T Ethernet ports.
Table 1-3 S5120-SI series 10/100/1000Base-T Ethernet port specifications
Item
Connector type
Interface speed and operating
mode
Max transmission distance
Transmission medium
Standard

1000Base-X SFP Interface

Each S5120-SI series provides four 1000Base-X SFP interfaces on its front panel. You can select the
GE SFP transceivers described in Table 1-4.
RJ-45
EIA/TIA-232
9600 bps to 115200 bps (defaulting to 9600 bps)
It can be connected to an ASCII terminal.
It can be connected to a serial port of a local or remote (through a
pair of modems) PC running terminal emulation program.
RJ-45
10 Mbps, full duplex
100 Mbps, full duplex
1000 Mbps, full duplex
MDI/MDI-X, auto-sensing
100 m (328.1 ft.)
Category-5 unshielded twisted pair cable
IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab
1-5
Specification
Specification